Basement Waterproofing in Pakistan

Basement Waterproofing in Pakistan

Basement Waterproofing in Pakistan

During the construction of basement of the building, Basement Waterproofing in Pakistan is essential consideration.
Mostly the basement waterproofing is not prefer to be high consideration and prioritized. And they try to use cheaper and inappropriate options for basement waterproofing. As a result of this negligence, this will leads to failure and disastrous changes can be happen to building in future.

Now a days the building designers are using the technique of waterproof concrete block to build basements which are well graded and even waterproof. Basement Waterproofing in Pakistan. This new technique use to prevent water from entering the building as concrete is dense that water cannot pass through it. For more safety, use the hydrophobic strips to be installed in construction joints to lower the risk of failure of building.

There are two types of basement waterproofing which are type A and Type B. In type A the waterproof concrete itself considerable to stop the water and protects the building. And in Basement Waterproofing in Pakistan the type B the water has to be tanked. Tanking basement means to repel the water and stopped by some materials inside or outside the building like water stopper.

External tanking system is designed in most new basement waterproofing structures which is used to lower the water from the surrounding ground area which in turn lower the level of water against the building structure. The point of focus is the position of the land drain. Basement Waterproofing in Pakistan. It should be positioned under the internal slab so it helps to relieve the water level to the depth. If the position of the land drain is incorrect then this system will less effective.

To establish a strong resistance against water there’s need of build the basement structure more effectively and strong. But there are some points from where water can intact the building Basement Waterproofing in Pakistan which are usually construction joints so there is a need of other technique to prevent the water to enter the building which is the secondary waterproofing (Cavity drain membrane system).

Related Posts

Enter your keyword