waterproofing chemical

waterproofing chemical

waterproofing chemical

SEALER COATING

Acrylic Base Waterproofing Chemical (Acrylic Based Waterproofing Paint) which is known as elastomeric coating , flexible single pack waterproofing membrane made out of 100% pure acrylic polymers under the technical collaboration of M/s Insulating Paints pakistan . It is used to fill Hair line cracks on walls and terrace. It provides a smooth and sheen finish to all surfaces. It has been tested by ISO in waterproofing chemical department .

FEATURES

  • waterproofing chemical Gives a smoother and FLEXIBLE  surface to the floor
  • Offers good abrasion resistance

ADVANTAGES

  • Gives excellent waterproofing.
  • It is washable and Scrub resistant.
  • It eliminates the requirement of any other primer coat.
  • Excellent resistance to algae and fungus.
  • Being elastic in nature it allows minor structural movements.

FOR RCC AND CEMENT SURFACE

  • urface PreparationClean the surface with adequate quantity of water. Make surface dust & grease free; remove all previous coatings which may have loose bond with the surface. If required, scrub with wire brush or use scrapper to remove old flake, chips & dust.
  • Filling of Cracks: Weather cracks are the cause of water/leakages thru wall and roofs of buildings. In case of a presence of prominent surface cracks please fill up the cracks with Diamond shield or any good quality crack filler before applying sealercoat
  • Primer Coat: Old, uneven and highly porous cement surfaces absorb essential polymers of Sealercoat. Hence- apply one or two coats of Sealoxy Primer or any other water based Undercoat for the best results and good finish.
  • Final Finish: Apply two Coats of Diluted Sealercoat with 15% water & should be applied with an interval of 3 to 4 hours between two coats.


For Any Metal Sheet:

  • Surface Preparation: Clean the surface and make it dust, grease & Oil free and then apply a coat of good quality zinc phosphate primer to avoid corrosion of the metal sheet.
  • Joint Filling: Between the overlaying joints of Galv. / Asb. Sheets, insert cotton bedding or gauze, soaked & dipped in un diluted Sealercoat for at least 2 inch in depth. (Length wise). Galvanized “J” bolts may be covered with cotton gauze dipped in undiluted Sealercoat & liberally wrapped around the bolt to cover sufficient area.

SBR LATEXT BASED WATERPROOFING CHEMICAL

IT is a Styrene Butadiene based liquid useful as an additive for concrete / mortars in waterproofing applications, as well protective coating to debars and cementitious substrates. It also serves as bond coat to repair section.

Features:

  • Workability
  • Corrosion resistant
  • Durability

Advantages:
  • White liquid mixed in cement mortar can be easily applied by brush.
  • Useful as a bonding agent between old and new concrete surfaces.
  • Useful as waterproofing coat in Toilets,Terraces, Perapets etc
  • Excellent as a cement modifier.
  • Repair mortar, modified with Tuff Crete – SBR suitable for repairing of RCC members.

Area of Application:
  • Repairs to RCC beams, Columns, slabs and other RCC members.
  • In repair mortars/concretes.
  • Waterproofing of terrace, toilets, chajja, masonry walls
  • Waterproofing for mortars / concretes.

For Bond Coat:
  • Mix TUFFCRETE- SBR with neat cement in 1:1.5 proportions by weight.

For Waterproofing Coat:
  • Pre wet the surface before application of TUFFCRETE- SBR Apply 2 coats of TUFFCRETE- SBR with neat cement in 1:1.5 proportion by weight With gap of 4 to 6 hours, over the cleaned surface. Cure the surface by sprinkling water for 3-4 days.

Surface Preparation:
  • The surface should be thoroughly cleaned and free from oil, grease and other contaminates
  • . Remove loose materials also

waterproofing chemical

Leveraging on our intelligent professionals, we are presenting a wide assortment of Cement Base Waterproofing Chemical. It can be applied on roofs, walls, terraces, parapet walls, sloping roof & side walls of buildings with 3 to 5 mm thick layer coating for waterproofing. It gives excellent results when applied in the sunk portion of the bathrooms, toilets and swimming pools. The offered waterproofing can be applied as an under layer for terrace tiles work, and also as a filler to tile joints.

Features:


Application:

  • It can be applied on Roofs, Walls, Terraces, Parapet Walls, sloping roof & side walls of buildings with 3 to 5 mm thick layer coating for waterproofing
  • It gives excellent results when applied in the sunk portion of the bathrooms, toilets and swimming pools
  • Can be applied as an under layer for terrace tiles work, and also as a filler to tile joints
  • For Coating structured steel of beams and columns


Advantages:

  • Cost effective &ready to use two components.
  • Can be used for protection of steel structure from chlorination and oxidation.
  • Simple application by brush, Mason apparatus or plastering applicators.
  • Environment friendly.
  • Leveraging on our intelligent professionals, we are presenting a wide assortment of Cement Base Waterproofing Chemical. It can be applied on roofs, walls, terraces, parapet walls, sloping roof & side walls of buildings with 3 to 5 mm thick layer coating for waterproofing. It gives excellent results when applied in the sunk portion of the bathrooms, toilets and swimming pools. The offered waterproofing can be applied as an under layer for terrace tiles work, and also as a filler to tile joints.Features:
    • Long lasting
    • Waterproofing undercoat
    • Resistance to alkali


    Application:

    • It can be applied on Roofs, Walls, Terraces, Parapet Walls, sloping roof & side walls of buildings with 3 to 5 mm thick layer coating for waterproofing
    • waterproofing chemical gives excellent results when applied in the sunk portion of the bathrooms, toilets and swimming pools
    • Can be applied as an under layer for terrace tiles work, and also as a filler to tile joints
    • For Coating structured steel of beams and columns


    Advantages:

    • Cost effective &ready to use two components.
    • waterproofing chemical Can be used for protection of steel structure from chlorination and oxidation.
    • Simple application by brush, Mason apparatus or plastering applicators.
    • Environment friendly.
    • We are offering a wide range of Integral Water Proofing Chemical. It is a combination of organic and inorganic components that reacts with Portland cement to produce complete hydration. The increased hydration not only provides internal curing & a much denser cement paste, but also increases the early & ultimate strength of concrete thus produces highly durable impermeable concrete or mortar, for the protection against water leakages.Features:
      • Very good Adhesion to bricks
      • Acrylic base
      • Reasonable price
      • Increased strength
      • no cracks on wall

      Advantages:

      • Completely water tight cement concrete or plaster.
      • Resist water penetration & absorption in to concrete & plaster surface.
      • Increase density & strength of the Cement mortar by reducing water to cement ratio.
      • Helps reduce salt precipitation , efflorescence & fungal growth.
      • Helps Crystallization of cement particles.
      • Gives protection to cement surface against vapors of acid & alkali.
WhatsApp chat

Enter your keyword