Showing all 11 results

Bitumen Emulsion

18,000
Bitumen emulsion is a liquefied type of bitumen with a low viscosity. By dispersing bitumen in water and adding an emulsifier, ordinary bitumen turns into a low viscosity liquid that can easily be used in a variety of applications, including repairing and maintaining roads, waterproofing, spraying, etc.

Bitumen Membrane Sheet

4,000
bitumen membrane is used for bolster concentrate roof waterproofing. This waterproofing membrane is come on site in the form of rolls.

Hygrip Membrane Roll

5,800
Hy-Grip modified bituminous membranes meet the highest international quality standards and are suitable for a wide range of applications. Roofs, re-roofing, accessible and non-accessible roofs, vehicle parking decks, and a range of additional applications in the home and industrial sectors are all covered by Hy-Grip membranes.

Koster PU Injection

1,000
Koster PU  is an injection foam for waterproofing of cracks in concrete and masonry. It stops leakages even under pressurised water. KOSTER PU is applied in a single step without necessity of subsequent injection with a solid body resin. KOSTER PU reacts only in contact with water.

PU Joint Sealents

650
PU Sealant is a one-part, elastomer sealant based on urethane which cures at room temperature. It is mainly used in applications relating to assembling and sealing. For these applications, the product is referred to as adhesive sealant or polyurethane adhesive sealant.

SBR Chemical

270
SBR is widely known as waterproofing based chemicals which is applied many as an external coating over the material. Construction Chemicals SBR is a white styrene butadiene emulsion used to improve the properties of cement renders, screeds and mortars. It is also used in conjunction with Construction Chemicals Tanking Slurry as a priming coat or tight render basecoat.

Swell Bar

350
Swell Bar are swell able acrylic pre-form strips and rings that come in a variety of different profiles. The seals swell in contact with both potable water and salt water, and is resistant to a variety of chemicals.

Thermoshield

5,000
Thermoshield is one component polymoorph base elastomeric.

Unicorn Seal K1 waterproofing chemical

2,500
Unicorn Seal K1 is two component elastomeric cement based waterproofing coating.

Unicorn Seal K-1

Unicorn Seal K-1 is a waterproof protective coating which has high flexibility. It is also known as two components coating which is polymer modified and cement based elastomeric waterproof protective coating normally used for the purpose of concrete waterproofing. Because of its excellent adhesion, weatherproofing and waterproofing properties and abrasion resistance qualities seamless protective area is ensured. Unicorn Seal K-1 ,waterproofing chemical ,can apply both on vertical and horizontal surfaces it is considered an economical way of waterproofing comparatively and also known as polymer-modified cement-based protective coating. Before Unicorn seal K1 waterproofing chemical coating or application the substrate must be sound, properly cleaned and free from all voids and cracks. Bond breakers like oil, grease and dirt particles, water repellents must also be cleaned property before this cementitious coating. This waterproofing chemical  material may be applied by brush, roller, troweled it depend upon the type of application and project specifications. Its shelf life is 12 months and it must be stored at 35° C or below in a shaded environment. The liquid component of this product must not be allowed to freeze. If it is stored at high temperature then its shelf life will be reduced. Unicorn Seal K-1 is coated in below mentioned surfaces both vertically and horizontally:
  • Water structures
  • Sewage treatment plants
  • Basement walls
  • Balconies, Plazas, deck
  • Underneath tile adhesive mortars
  • Wastewater treating plants
  • Reinforced concrete structure
  • Water tanks and reservoir
  • All similar works

Advantages of Unicorn Seal K-1

With the help of this waterproofing product large static or dynamic cracks can easily be sealed it also bridges shrinkage cracks. This waterproofing product is exposed or applied on required surface with flexible or rigid mortars in order to bring uniform appearance. There are several advantages of this admixture mentioned below:

Easy to use and apply:

This waterproofing material can easily be applied on the required surface and ensure the safety of worker and the required results can easily be achieved with the application of this waterproofing product.

Environmental friendly:

This waterproofing coating is considered as environment friendly material because it has no adverse effect on environment and also does not effect the health of residents of the building.

UV Stable:

This waterproofing chemical coating is UV-stable coating that avoids ultraviolet radiation by sun which is harmful to humans and materials.

Flexibility:

Flexibility is one of the major advantage of Unicorn Seal K-1. Because of this advantage the chances of exposed crack are reduced to minimized and there is no way for water to enter. Flexibility makes if durable and there is no effect of thermal expansion and contraction.

Others:

  • Resist hydro static pressure
  • Crack bridging ability
  • Enable substrate to breath
  • Can also be applied to damp surfaces
  • Abrasion resistant
  • Self-curing material
  • Active barrier for water and Carbon dioxide

Wall Dampness Solution

2,000
There are many different reasons why walls can become moist. Wall dampness issues are frequently only discovered until internal dampness symptoms appear. Walls can be harmed by moisture from the ground that rises above ground level. Splashing rainwater can also dampen walls.

Water Stopper

150
A waterstopper is an element of a concrete structure, intended to prevent the passages of fluids (such as water) when embedded in and running continuously through concrete joints.